Acrylic adhesive on Steel

Lap Shear Strength, ISO 4587: Grit Blasted Mild Steel (GBMS) N/mm² 30 (psi) (4,380)

Steel 4150

Shear Strength, psi, ASTM D1002 Typical Value Aluminum 3600 Steel 3780

Lap Shear Strength, ISO 4587: Grit Blasted Mild Steel (GBMS) N/mm² 26 (psi) (3,780)

Light Abrasion and Solvent 24.1 MPa (3500 lb/in²) (CF ) 23 °C Cold Rolled Steel

Galvanized Steel N/mm² 24 (psi) (3,450)

Cured for 72 hours @ 22 °C Lap Shear Strength, ISO 4587: Steel N/mm² 23.1 (psi) (3,355)

Overlap Shear Strength … Dwell Time: 24 h … Test Method: ASTM D1002, ISO 4587 … Cold Rolled Steel Light Abrasion and Solvent Clean 21 MPa (3100 lb/in²) (CF ) ¹

Shear Strength, Sandblasted Steel, ASTM D 1002, psi 3,000 (2 mil bondline)

Lap Shear Strength, ISO 4587: Grit Blasted Mild Steel (GBMS) N/mm² 19 (psi) (2,820). Cured for 72 hours @ 22 °C.

Cured for 15 minutes @ 121 °C. Lap Shear Strength, ISO 4587: Steel N/mm² 18.8 (psi) (2,720)

After 24 hours @ 23 °C, Activator 7387™ on 1 side Lap Shear Strength ISO 4587: Steel (grit blasted): 0 mm gap N/mm² 18

Treated steel, RC #14 3,530 2,560 ASTM D1002

After 24 hours @ 22 °C, Activator 736™ or 734™ on 2 sides. Lap Shear Strength, ISO 4587: … Steel (grit blasted) N/mm² ≥17.2LMS

Cured for 48 hours @ 23°C, Activator 7387™ on 1 side. Steel (grit blasted): 0.127 mm gap N/mm² 17 (psi) (2,500)

Cured for 24 h @ 22 °C, Activator 7075™ on 1 side. Lap Shear Strength, ISO 4587: Steel (Grit Blasted) N/mm2 15.2 (psi) (2,200)

Overlap Shear Strength, dwell 7 d, ASTM D1002, ISO 4587. Cold Rolled Steel, MEK/Abrade/MEK, 15 MPa (2172 lb/in²).

After 24 hours @ 22°C, Activator 7387™ on 1 side. Lap Shear Strength ISO 4587: Mild steel (grit blasted) N/mm² 15 to 30

Galvanized Steel N/mm² 15 (psi) (2,210)

Overlap Shear Strength … Test Condition: 23 °C … Dwell Time: 24 h … Test Method: ASTM D1002, ISO 4587 … Cold Rolled Steel Light Abrasion and Solvent Clean 14.4 MPa (2092 lb/in²) ²

Overlap Shear Strength … Temperature: 23 °C (73 °F) … Test Method: ASTM D1002, ISO 4587 … 7d Cold Rolled Steel MEK/Abrade/MEK 14 MPa (2031 lb/in²) ¹

Galvanized Steel N/mm2 (psi) 14 (2,080)

Cured for 24 hours @ 23°C, Activator 7387™ on 1 side: Lap Shear Strength, ISO 4587: Steel: 0.05 mm gap N/mm² 13.8 (psi) (2,000)

Cured for 24 hours @ 25 °C Lap Shear Strength, ISO 4587: Steel (bars, solvent cleaned) N/mm² ≥13.8

Overlap Shear Strength … Temperature: 23 °C (73 °F) … Test Method: ASTM D1002, ISO 4587 … 12.6 MPa (1830 lb/in²) 7d Cold Rolled Steel MEK/Abrade/MEK

Lap Shear Strength, ISO 4587: Steel (grit blasted) N/mm² 12 (psi) (1,800)

Cured for 24 hours @ 22°C, Activator 7387™ on 1 side. Lap Shear Strength: Steel: 0.05 mm gap N/mm² ≥11LMS (psi) (≥1,595)

Lap Shear Strength, ISO 4587: Steel: 0.05 mm gap N/mm² ≥11LMS (psi) (≥1,595)

Overlap Shear Strength. Temperature: 23 °C (73 °F). Dwell Time: 7 d. Test Method: ASTM D1002, ISO 4587. Galvanized Steel MEK/Abrade/MEK 1330 lb/in². (CF).

Cured for 72 hours @ 22°C, Activator 7387™ on 1 side. Lap shear strength, ISO 4587: Steel N/mm² 6.9 (psi) (1,000)

Overlap Shear Strength … Dwell Time: 72 h … Test Method: ASTM D1002, ISO 4587 … Cold Rolled Steel MEK / Abrade / MEK 6.6 MPa (952 lb/in²) ¹

Lap Shear Strength, ISO 4587: Galvanized Steel N/mm² 6 (psi) (880). Cured for 72 hours @ 22 °C.

Overlap Shear (psi), ASTM D1002. DP8010NS Blue column: Galvanized steel (MEK/abrade/MEK) 840. Cured 7 days at room temperature.

Overlap Shear Strength … Dwell Time: 72 h … Test Method: ASTM D1002, ISO 4587 … Cold Rolled Steel MEK / Abrade / MEK 5.6 MPa (816 lb/in²) ¹

Cured for 24 hours @ 22°C, Activator 7387™ on 1 side. Lap Shear Strength, ISO 4587: Steel N/mm² ≥5.2 (psi) (≥754)

Galvanized Steel N/mm² 4.9 (psi) (700)

Lap Shear Strength, ISO 4587: Grit Blasted Mild Steel (GBMS) N/mm² 2.5 (psi) (365). Cured for 72 hours @ 21 °C.